Filter
Top Products
146
Maintenance Menu
Chapter 7 Menus
M3B: VANC RX
PAR AMET ER
M3B0: VANC RX
PACKET
For setting HDSDI VANC data input parameters
Notes
• In 59.94i, 50i, 29.97P or 25P mode, selecting the line also selects the
corresponding line in the second field (for example, if line 9 is selected, line 527
is also selected for VANC packet reception).
• Menu item M3B0 enables recording of one VANC packet when the selected line
contains any packets whose DID/SDID matches the value set with this menu
item.
• Up to four packets are recorded per each line regardless of the DID and SDID
for the VANC set with menu item M3B1 or M3B2.Menu items M3B1 and MSB2
enable recording of up to four VANC packets in the selected line, respectively,
regardless of the DID/SDID value.
• It is not possible to set the same line with menu items M3B0, M3B1, and M3B2.
If the same line is specified, priority is given in the order of M3B0, M3B1, and
M3B2 (for example, if the same line is specified with M3B0 and M3B1, the
setting with M3B1 is ignored).
• When VANC data is output to HDSDI playback signals, the number of the
output VANC line is the same as that of the input VANC line.
• When a UMID or essence mark line is selected with M3B1 or M3B2, UMID or
essence mark output takes priority. To disable UMID or essence mark output,
set setup menu item 651 or 657 to “off”.
Sub-item
1 LINE Selects the lines for the VANC to be received.
OFF
, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)
2 DID Specification of the DID of the VANC to receive
00h
-FFh
3 SDID Specification of the SDID of the VANC to receive
00h
-FFh
M3B1: LINE1 SEL Selects the lines to be received for the HDSDI VANC data.
OFF
, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode)
OFF
, 9LINE to 25LINE (59.94P/50P mode)
M3B2: LINE2 SEL Selects the lines to be received for the HDSDI VANC data.
OFF
, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode)
OFF
, 9LINE to 25LINE (59.94P/50P mode)
M3C: POWER SAVE CONTROL Specification of whether to enable the power saving function
OFF
, ON
M3D: DATE/TIME PRESET Specification of the date and time
M3E: USB MEMORY UTIL For installation of software upgrade
For details, refer to the Maintenance Manual.
M3F: FACTORY SETUP For details, refer to the Maintenance Manual.
M4: SETUP MAINTENANCE: items relating to the setup menu
Item Setting
M40: EXTENDED MENU Select whether to display the extended menu.
DISABLE
: Do not display.
ENABLE: Display.
M41: CUSTOMIZE Select whether to enable the customization function of the setup menu.
DISABLE
: Do not display.
ENABLE: Display.
M3: OTHERS: Other setting items
Item Setting