Filter
Top Products
141
Setup Menu
Chapter 7 Menus
935 DETAIL GAIN (DC) Adjust the down-converter image enhancer, the sharpness of edge
enhancement.
0
to 7FH
936 LIMITER (DC) Adjust the down-converter image enhancer, the maximum detail level
added to emphasize the original signal.
0 to 20H
to 3FH
937 CRISP (DC) Adjust the down-converter image enhancer, the threshold amplitude at
which low amplitude signals are not emphasized.
0
to FH
938 LEVEL DEPEND THRESHOLD (DC) Adjust the down-converter image enhancer. Set the luminance range for
edge enhancement.
0 to 8
to FH
939 H DETAIL FREQUENCY (DC) Adjust the down-converter image enhancer. Set the central frequency for
edge enhancement.
2.6MHz, 3.4MHz, 3.9MHz
, 4.6MHz
940 H/V RATIO (DC) Adjust the down-converter image enhancer. Set the horizontal/vertical
ratio for edge enhancement.
0 to 3
to 7
942 V FILTER SELECT (DC) Set the vertical interpolation filter coefficient for down-converter output (in
1080 mode only).
1
to 3
943 CROSS COLOR CRISP (DC) Set the cross color crisp level for down-converter output.
0 to 4
to FH
950
UP CONVERTER MODE
a)
Select the up-converter mode.
EDGE CROP
: Select the edge-crop mode.
LETTER BOX: Select the letter box mode.
SQUEEZE: Select the squeeze mode.
951
H CROP POSITION (UC)
a)
Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the up converter output when menu item 950 is set to “crop”.
–120 to 0
to 120
952
LETTER BOX POSITION (UC)
a)
When menu item 950 is set to “l-box”, adjust the vertical location of the
position where the picture is cut out for up converter output in letter box
mode.
–120 to 0
to 120
953
UP CONVERTER PROCESS (UC)
a)
Select the source picture to use in converting SD to HD.
FIELD: Use field pictures.
ADAPTIVE
: Frame or field is selected automatically.
954
DETAIL GAIN (UC)
a)
Adjust the up-converter image enhancer, the sharpness of edge
enhancement.
0 to 40H
to 7FH
955
LIMITER (UC)
a)
Adjust the up-converter image enhancer, the maximum detail level added
to emphasize the original signal.
0 to 20H
to 3FH
956
CRISP THRESHOLD (UC)
a)
Adjust the up-converter image enhancer, the threshold amplitude at
which low amplitude signals are not emphasized.
0 to 8
to FH
957
LEVEL DEPEND THRESHOLD (UC)
a)
Adjust the up-converter image enhancer. Set the luminance range for
edge enhancement.
0 to 8
to FH
958
H DETAIL FREQUENCY (UC)
a)
Adjust the up converter image enhancer. Set the center frequency and
frequency properties for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz
: 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
Menu items in the 900s, relating to digital process
Item number Item name Settings