Filter
Top Products
26
Front Panel
Chapter 2 Names and Functions of Parts
C Remote interface: When the remote control switch is
set to REMOTE, displays the name of the interface
selected with setup menu item 214 REMOTE
INTERFACE.
D Clip playback mode: The clip playback mode appears
as follows, according to the settings of setup menu
items 142 REPEAT MODE and 154 SINGLE CLIP
PLAY MODE.
E Jog/shuttle dial mode: Appears when the unit is in
shuttle, jog, or variable mode.
h Format conversion
This displays the status of 1080/720 format conversion.
: Format conversion is not being performed.
: Format conversion is being performed.
See page 63 for more information about 1080/720 cross
convert function.
i Reference signal
This displays the type of reference signal to which this unit
is synchronizing.
When there is no display, the unit is synchronizing to the
internal reference signal.
INPUT: Input video
HD REF: HD-format reference signal
SD REF: SD-format reference signal
The HD REF or SD REF display flashes when the video
input signal is not synchronized to the reference signal, and
when the signals are synchronized but their phases do not
match.
j Video input display
This displays the currently selected video input signal.
HDSDI: HDSDI video input
SDSDI: SDSDI video input
i.LINK: i.LINK TS (HDV) input
1)
SG: Test video signal from the internal signal generator
1) When the PDBK-201 option board is installed
The display blinks when there is no video input signal, and
when the video input signal does not match the system
frequency of this unit.
The video signal input is selected with V INPUT on page
P1 VIDEO of the function menu (see page 49).
Video monitor display
When you press the DISPLAY button, the display window
changes to the video monitor display.
A Audio level meters: LEVEL MT on page P2 AUDIO
of the function menu decides whether the meter is to
be displayed and on which side, left or right, it is
displayed in the display window.
B Superimposed information: Appears when CHAR
SEL on the HOME page of the function menu is set to
“ON” or “LCD”.
Display Description
BANK1 The current menu settings are the same
as the settings in menu bank 1.
BANK2 The current menu settings are the same
as the settings in menu bank 2.
BANK3 The current menu settings are the same
as the settings in menu bank 3.
DEFAULT The current menu settings are the same
as the factory defaults.
No display The current menu settings are different
from all of the above.
Display Setup menu setting Description
Item 142 Item 154
REPEAT play off Repeat playback
mode: Perform
repeat playback of
all clips on the disc.
SINGLE off on Single clip playback
mode: Play the
currently selected
clip once.
SNGL
RPT
play on Single clip repeat
playback mode:
Play the currently
selected clip
repeatedly.
No
display
off off Continuous
playback mode:
Perform continuous
playback of all clips
on the disc, playing
each clip once.
FC
Note
Note
0
-10
-20
-30
-60
-40
1 2
0
-10
-20
DC-SQ
-30
-60
-40
3 4
TCR.00:45.39.18*
JOG STILL
A Audio level meters
C Recording mode indication
E Converter display
D Low battery warning
B Superimposed information