Filter
Top Products
131
Setup Menu
Chapter 7 Menus
a) When the PDBK-S1500 or PDBK-F1500 option is installed.
b) When the PDBK-201 option board is installed
c) FTP connections can be made only when the device connected to the
REMOTE(9P) connector (D-sub 9 pin) is in stop mode. During FTP
connections, the device connected to the REMOTE(9P) connector cannot
be used to control this unit.
212 VIDEO REMOTE CONTROL
SELECT
a)
Select whether to control the up converter or down converter when
controlling the image enhancer from the HKDV-900 or another unit
connected to the VIDEO CONTROL connector.
down
: Control the down-converter.
up: Control the up-converter.
u&d: Control both the up- and down-converter.
Note
It is also possible to adjust setup menu item 718 SETUP LEVEL/BLACK
LEVEL from the HKDV-900. Hold down the D2 button on the HKDV-900
and rotate the SETUP dial.
214 REMOTE INTERFACE When the remote control switch is set to REMOTE, select the device from
which to remote-control this unit.
9PIN
: Device connected to the REMOTE(9P) connector.
SDI: Device connected to the SD/HDSDI INPUT connector.
i.LINK: Device connected to the (i.LINK) S400 connector.
b)
215
i.LINK MODE
b)
Select the connection method for the (i.LINK) S400 connector.
FAM (FAM (PC REMOTE)):
FAM connection
TS: TS connection
257 NETWORK ENABLE Select the remote control switch positions which enable network
connections.
net (network)
: Only when the switch is set to “NET”.
n&9P (network & remote(9PIN)): When the switch is set to “NET”, and
when the switch is set to “REMOTE” and setup menu item 214 is set
to “9PIN”.
c)
Menu items in the 200s, relating to the remote control interface
Item number Item name Settings
HD1500
Menu items in the 300s, relating to editing operations
Item number Item name Settings
301 VAR SPEED RANGE FOR
SYNCHRONIZATION
Select the playback speed range when carrying out playback in variable
speed mode from a remote control unit connected to the REMOTE(9P)
connector.
–
2~+2: –2 to +2 times normal speed.
wide: –2.20 to +2.20 times normal speed.
311 [F1600]
ANALOG AUDIO EDIT PRESET
REPLACE FOR CH1
Select methods for setting the edit presets of the digital audio channels
CH1 to CH4 of this unit. Make these settings when using an editor (PVE-
500, BVE-600, etc.) or remote control unit without a function to control
digital audio edit presets.
The edit presets of the digital audio channels of this unit are turned on
and off according to the specified analog audio presets of the editor or
remote control unit.
nodef (no definition): No definition
ch 1 (analog ch1): Follow the edit preset of analog channel 1.
ch 2 (analog ch2): Follow the edit preset of analog channel 2.
ch1+2 (analog ch1+ch2): Follow the edit preset of analog channel 1 or
2.
(The default settings for each item are as follows)
311: ch 1 (analog ch1)
312: ch 2 (analog ch2)
313: nodef (no definition)
314: nodef (no definition)
312 [F1600]
ANALOG AUDIO EDIT PRESET
REPLACE FOR CH2
313 [F1600]
ANALOG AUDIO EDIT PRESET
REPLACE FOR CH3
314 [F1600]
ANALOG AUDIO EDIT PRESET
REPLACE FOR CH4