Filter
Top Products
134
Setup Menu
Chapter 7 Menus
610 [F1600]
REGEN CONTROL MODE
Select whether or not the time code is automatically regenerated.
auto(assem & insert)edit: In automatic editing carried out in either
assemble mode or insert mode with this unit as the recorder,
regardless of the settings of F1 (TCG) and F2 (PRST/RGN) in
function menu page 5, the time code generator regenerates
according to the time code on the disc.
auto assemble edit: In automatic editing carried out in assemble mode
with this unit as the recorder, regardless of the settings of F1 (TCG)
and F2 (PRST/RGN) in function menu page 5, the time code
generator regenerates according to the time code on the disc.
manual: Regardless of whether this unit is the recorder or player, the
time code generator operates in accordance with the settings of F1
(TCG) and F2 (PRST/RGN) in function menu page 5.
assemble & insert: Whether local or remote and regardless of the
settings of F1 (TCG) and F2 (PRST/RGN) in function menu page 5,
the time code generator regenerates according to the time code
played back from the disc.
611 TC OUTPUT PHASE IN EE MODE Select the timecode output mode for output from the TIME CODE OUT
connector in E-E mode.
thru (through): Output the timecode input to the TIME CODE IN
connector as it is.
v-in (video input phase): Output the timecode with the same phase as
the input video signal phase.
v-out (video output phase)
: Output the timecode with the same phase
as the output video signal phase.
612 TC OUTPUT MUTING IN SEARCH
MODE
Select whether to suppress the output from the TIME CODE OUT
connector in jog/shuttle mode.
on
: Suppress.
off: Do not suppress.
618
UPCONV EMBEDDED VITC
a)
Select the source of the VITC embedded into output HDSDI when up
converting during playback of SD discs.
VITC:
Select the VITC of the SD disc.
LTC: Select the LTC of the SD disc.
619
VITC
a)
Select whether to record the VITC generated by the internal timecode
generator during IMX recording.
off: Do not record the internally generated VITC.
on:
Record the internally generated VITC.
Note
Even if this item is set to “off”, VITC is recorded if the input video signal
contains VITC and the VITC line is set to “thru” in menu item 723.
651 UMID SDI OUTPUT Select whether to output UMID in the VANC of the SDI output.
off: Do not output.
on
: Output.
See “Using UMID Data” (page 171) for more information about UMID.
652
UMID SD VANC LINE
b)
Select the line in which UMID is output when menu item 651 is set to
“on”.
12 H (12 line), 13 H (13 line), 15 H (15 line), 16 H (16 line), 17 H (17
line), 18 H (18 line), 19 H (19 line) (59.94i/59.94P/29.97P mode)
9 H (9 line), 10 H (10 line), 12 H (12 line), 13 H (13 line), 14 H (14 line),
15 H (15 line), 16 H (16 line), 17 H (17 line)
, 18 H (18 line) (50i/50P/
25P mode)
See “Using UMID Data” (page 171) for more information about UMID.
Menu items in the 600s, relating to the timecode, metadata, and UMID
Item number Item name Settings