Filter
Top Products
158
Troubleshooting
Appendix
When a disc is inserted
During front panel operations
Alarm message in time
data display area
Alarm message in video monitor screen Description/action
Unknown FS! UNKNOWN FILE SYSTEM.
PLEASE FORMAT DISC OR EJECT.
Format the disc, or eject it (see page 94).
No FS! NO FILE SYSTEM.PLEASE EJECT DISC. Eject the disc.
ILL. Disc! IRREGULAR DISC IS USED.
USE PROFESSIONAL DISC.
Use a Professional Disc.
IRREGULAR DISC IS USED.
PLEASE EJECT DISC.
Salvage NG! CLIP SALVAGE WAS NOT COMPLETED. See “Handling of discs when recording does not end
normally (salvage functions)” (page 58).
Salvage XXXX DISC CANNOT BE RECORDED.
FORMAT DISC OR CONTACT SERVICE
TO RUN CLIP SALVAGE PROGRAM.
(XXXX)
Over DUR! EXCESSIVE DURATION IS IN DISC.
RECORDING AND PLAYBACK IS NOT
POSSIBLE.
Data in excess of the rated capacity is recorded on
the disc.
No Support! FORMAT NOT SUPPORTED.
RECORDING AND PLAYBACK IS NOT
POSSIBLE.
A disc in an unsupported recording format is loaded.
Use a disc in a format supported by this unit.
ILL. Index! INDEX FILE ERROR.
PLEASE FORMAT DISC OR EJECT.
Format the disc, or eject it (see page 94).
Formatting! AUTO FORMATTING IS EXECUTING. Wait until the format has been completed and try
again.
FORMAT NG! AUTO FORMATTING WAS NOT
COMPLETED.
Eject the disc and insert it again, or insert another
disc.
DI read err CANNOT READ DISC INFORMATION.
PLEASE EJECT DISC.
Read err
DRV ADJ err CANNOT PERFORM AUTO DRIVE
ADJUSTMENT.
Alarm message in time
data display area
Alarm message in video monitor screen Description/action
KEY INHI.!
a)
KEY INHIBIT MODE IS SELECTED.
SET KEY INHIBIT SWITCH TO OFF.
This appears when the KEY INHI switch is “on”.
Set the KEY INHI switch to “off”.
REMOTE!
a)
REMOTE MODE IS SELECTED.
SET REMOTE/LOCAL/NETWORK
SWITCH TO LOCAL.
Set the remote control switch to “LOCAL”.
No Disc!
a)
NO DISC. Insert a disc and try again.