Filter
Top Products
122
Setup Menu
Chapter 7 Menus
Items in the basic menu
The basic menu items (excluding the items related to the
digital hours meter) are listed in the following table.
• Item names are the names which appear on the video
monitor screen of this unit and an external monitor,
when the input signals to the monitor are the video
signals output from the COMPOSITE OUTPUT 2
(SUPER) connector, the SDSDI OUTPUT 2 (SUPER)
connector, or the HDSDI OUTPUT 2 (SUPER)
connector.
• An abbreviated name appears in the time data display
area when you press the NEXT button.
• The values in the Settings column are the values which
appear in the time data display area. (The values may
appear in a different format on an external monitor. In
this case, the external monitor values are shown in
parentheses.) Underlined values are the factory defaults.
Item group Function Refer to
Items
100 to 199
Settings relating to control
panels
page 129
Items
200 to 299
Settings relating to the remote
control interface
page 130
Items
300 to 399
Settings relating to editing
operations
page 131
Items
400 to 499
Settings relating to preroll page 132
Items
500 to 599
Settings relating to disc
protection
page 132
Items
600 to 650
Settings relating to the
timecode generator
page 133
Items
651 to 699
Settings relating to the
metadata and UMID
page 134
Items
700 to 799
Settings relating to video
control
page 136
Items
800 to 899
Settings relating to audio
control
page 138
Items
900 to 999
Settings relating to digital
processing
page 140
Item group Function Refer to
Item number Item name Settings
001 PREROLL TIME 0 s (0 sec)... 5 s (5 sec)
... 30 s (30 sec): Set the preroll time to between 0
and 30 seconds in steps of 1 second.
A preroll time of at least 5 seconds is recommended when using this
unit for editing.
002 CHARACTER H-POSITION Adjust the horizontal screen position (as a hexadecimal value) of the text
information output from the COMPOSITE OUTPUT 2 (SUPER) connector,
the SDSDI OUTPUT 2 (SUPER) connector, or the HDSDI OUTPUT 2
(SUPER) connector for superimposed display on the monitor. The
hexadecimal value 00 is for the far left of the screen. Increasing the value
moves the position of the characters to the right.
00 ... 0C
... 28 (When the number of system lines is 1080 and the
system frequency is 59.94i, 29.97P, 50i, 25P, or 23.98P.)
00 ... 0B
... 28 (When the number of system lines is 720 and the system
frequency is 59.94P or 50P.)
Set this item by adjusting to the required position while viewing the monitor.
003 CHARACTER V-POSITION Adjust the vertical screen position (as a hexadecimal value) of the text
information output from the COMPOSITE OUTPUT 2 (SUPER) connector,
the SDSDI OUTPUT 2 (SUPER) connector, or the HDSDI OUTPUT 2
(SUPER) connector for superimposed display on the monitor. The
hexadecimal value 00 is for the top of the screen. Increasing the value
lowers the position of the characters.
00 ... 2A
... 32 (When the number of system lines is 1080 and the
system frequency is 59.94i, 29.97P, 50i, 25P, or 23.98P.)
00 ... 29
... 32 (When the number of system lines is 720 and the system
frequency is 59.94P or 50P.)
Set this item by adjusting to the required position while viewing the monitor.