Filter
Top Products
90
Scene Selection (Clip List Editing)
Chapter 5 Operations in GUI Screens
To reset the timecode to 00:00:00:00
Select Reset to Zero in the Thumbnail Menu, and then
press the PUSH SET(S.SEL) knob.
To preset the frequently used timecode
Select Save Preset TC in the Thumbnail Menu, and
then press the PUSH SET(S.SEL) knob.
The timecode set in steps 4 and 5 is saved as a preset
value.
To recall the preset timecode
Select Recall Preset TC in the Thumbnail Menu, and
then press the PUSH SET(S.SEL) knob.
6
Press the PUSH SET(S.SEL) knob.
OK is selected.
7
Press the PUSH SET(S.SEL) knob again.
8
Save the clip list (see page 90).
To save clip lists
To save under a specified name
See page 73 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, display the Disc
Menu.
2
Select Save Clip List as..., and then press the PUSH
SET(S.SEL) knob.
A list of clip lists appears.
To switch the information displayed for clip lists
Press the b/OUT button.
With each press, the display changes in the order:
“Name & Date” >“Name & Title” >“Name & Sort
Date” >...
To sort clip lists
Select one of the following orders by selecting
Settings >Sort Clip List by... in the Disc Menu.
Name(A-Z): Sort in ascending order by clip list name.
Date(Newest First): Sort by date and time of clip list
creation, newest first.
3
Select the desired clip list name, and then press the
PUSH SET(S.SEL) knob.
To save under the same name
The following procedure saves the current clip list under
its current name (the name that appears in the clip list
thumbnail screen).
See page 73 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, display the Disc
Menu (see page 72).
2
Select Save Clip List, and then press the PUSH
SET(S.SEL) knob.
The clip list is saved. However, Save Clip List as... is
executed when the name displayed in the clip list
thumbnail screen is “no name”.
If you press the EJECT button or the on/standby button
before saving a new or edited clip list, a message appears
asking if you want to discard your changes and continue.
Follow the instructions in the message to continue or
cancel the operation.
Managing clip lists
To load clip lists
The following procedure loads a clip list stored on the disc
into the unit’s internal memory as the current clip list.
See page 73 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, display the Disc
Menu.
2
Select Load Clip List, and then press the PUSH
SET(S.SEL) knob.
A list of clip lists stored on the disc appears.
Save Clip List as...
E0003
E0004
E0005
E0006
E0007
E0095
E0098
Display Select
DVD og BI...
Name & Date/Sorted by Name
08 AUG2007 11:50
03 AUG2007 17:51
03 AUG2007 17:51
03 AUG2007 17:51
03 AUG2007 17:51
03 AUG2007 17:51
18 MAY2006 10:25
13 JUN2006 13:43
Disc Menu
Note