Filter
Top Products
159
Troubleshooting
Appendix
REC INHI.! AUTO FORMATTING WAS NOT
COMPLETED.
THE DISC WRITE PROTECT TAB IS SET
TO SAVE.
PLEASE EJECT DISC.
Set the disc’s Write Inhibit tab to enable recording
(see page 53).
THE DISC WRITE PROTECT TAB IS SET
TO SAVE.
AUTO FORMATTING WAS NOT
COMPLETED.
REC INHIBIT MODE IS SELECTED.
CHECK FUNCTION MENU.
PLEASE EJECT DISC.
This appears when REC INH on the HOME page of
the function menu is set to “ON”.
Set REC INH to “OFF” (see page 48).
REC INHIBIT. This appears if you press the REC button when a disc
error has occurred. Correct the disc error and try
again.
No Clip!
b)
NO CLIP. This appears when a playback, search or delete
operation is attempted on a disc with no clips
recorded on it.
Insert a disc with clips recorded on it.
Disc Top!
a)
DISC TOP. This appears if you press the PREV button or conduct
a high-speed reverse search when the unit is stopped
at the start of the disc.
Use forward search or playback instead.
Disc End!
a)
DISC END. This appears if you press the NEXT button or conduct
a forward high-speed search when the unit is stopped
at the end of the disc.
Use reverse search or playback instead.
Clip Top! CLIP TOP. This appears in single clip playback mode if you
execute a reverse search when the unit is stopped at
the first frame of a clip. To move to another clip, press
the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
Clip End! CLIP END. This appears in single clip playback mode if you
execute a forward search when the unit is stopped at
the last frame of a clip. To move to another clip, press
the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
MAX # Clips DISC CANNOT BE RECORDED TO.
FOR MORE RECORDING, DELETE
SOME CLIPS.
Delete unneeded clips, or insert a disc with enough
free space.
MAX # Files DISC CANNOT BE RECORDED TO.
FOR MORE RECORDING SPACE,
DELETE CLIPS OR NON-AV DATA.
(GENERAL FILES)
Delete clips or GENERAL files.
Disc Full! DISC FULL.
FOR MORE RECORDING, DELETE
SOME CLIPS.
Delete unneeded clips, or insert a disc with enough
free space.
MAX# SB CLP
b)
NO MORE SUB CLIPS CAN BE ADDED
TO CLIP LIST.
This appears when an attempt is made to add sub
clips when 300 sub clips have already been
registered.
Limit the creation of sub clips to 300 or fewer.
CL OVER DUR
b)
DURATION OF ONE CLIP LIST MUST BE
LESS THAN 24 HOURS.
This appears when you try to add a sub clip when the
total duration of sub clips in a clip list has already
reached 24 hours.
Create clip lists so that the total duration is within 24
hours.
Alarm message in time
data display area
Alarm message in video monitor screen Description/action