Filter
Top Products
128
Setup Menu
Chapter 7 Menus
3
Press the SAVE function button (F5).
The message “NOW SAVING...” appears on the video
monitor display, and “Saving...” appears in the time data
display area, while the settings of all items are returned to
their factory default settings. These factory default settings
are saved in memory. If you power off the unit while
settings are being saved, settings may not be correctly
returned to their factory default settings. Wait until the
saving is completed before powering off the unit.
To abandon the resetting operation
Instead of pressing the SAVE function button (F5), press
the RESET/RETURN button. The display returns to the
top level of the setup menu, leaving the settings
unchanged.
To customize the display of setup menu
items
You can select the menu items displayed in the setup
menu.
1
Set maintenance menu item M41: CUSTOMIZE to
“ENABLE”.
See page 148 for information about how to use the
maintenance menu.
2
Hold down the MENU button for about three seconds.
The SETUP CUSTOMIZE screen appears.
3
Turn the PUSH SET(S.SEL) knob so that the “*” mark
appears next to the item you want to hide or display in
the setup menu.
You can press the UP function button (F3) or the
DOWN function button (F4) to move the “*” mark by
100 menu items.
4
Press the PUSH SET(S.SEL) knob.
A setting screen for the currently selected item
appears.
5
Turn the PUSH SET(S.SEL) knob to select “on” or
“off”.
on: Display the item in the setup menu.
off: Do not display the item in the setup menu.
6
Press the PUSH SET(S.SEL) knob.
To continue selecting items
Repeat steps 3 to 6.
To set items more quickly
In step 3, turn the PUSH SET(S.SEL) knob to move
the “*” mark, and then press the ON function button
(F1) or OFF function button (F2) to set items
continuously.
7
Press the SAVE function button (F5).
Customization indication in the setup menu
When you open the setup menu after customizing the
displayed menu item, a “[C]” mark appears at the upper
right of the screen to indicate that the menu has been
customized.
ON
OFF
UP
DOWN
SAVE
SETUP
EXIT
SETUP CUSTOMIZE
*H01:OPE HOURS - on
H02:LASER0 - on
H03:LASER1 - on
H11:OPE HOURS r- on
H13:SEEK HOURS0r- off
H14:SPDL HOURS r- off
H15:LOAD COUNT r- off
H17:SEEK HOURS1r- off
001:P-ROLL TIME - off
002:CHARA H-POS - off
003:CHARA V-POS - off
ON
OFF
UP
DOWN
SAVE
SETUP
EXIT
SETUP CUSTOMIZE
H01:OPE HOURS - on
H02:LASER0 - on
H03:LASER1 - on
H11:OPE HOURS r- on
*H13:SEEK HOURS0r- off
H14:SPDL HOURS r- off
H15:LOAD COUNT r- off
H17:SEEK HOURS1r- off
001:P-ROLL TIME - off
002:CHARA H-POS - off
003:CHARA V-POS - off
RETURN
-
+
SAVE
SETUP
EXIT
CUSTOM ITEM-H13
SEEK RUNNING HOURS 0
(resettable)
on