Filter
Top Products
130
Setup Menu
Chapter 7 Menus
a) The disc is ejected after recording stops. b) The unit enters stop mode when the PLAY button is pressed. It enters
freeze picture mode (jog, shuttle, or variable mode) when the SHTL/JOG
button or VAR/JOG button is pressed.
131 AUDIO VOLUME Select whether each of the CH-1/ALL CH, CH-2 to CH-4 adjustment
knobs on the control panel is effective to control the audio recording level
and playback level on each channel or the CH-1/ALL CH adjustment
knob alone functions as a master control to control the audio level on all
channels together.
each
: Each of the CH-1/ALL CH, CH-2 to CH-4 adjustment knobs is
effective to control each channel.
all: The CH-1/ALL CH adjustment knob alone functions as a master
control.
When “all” is selected, the ALL CH indicator under the CH-1/ALL CH
adjustment knob lights up.
140 AREA MARKER Select whether to display the display area of SD output on the color LCD.
off
: Do not display.
on: Display.
142 REPEAT MODE Put the unit into repeat playback mode, or exit from repeat playback
mode.
off
: Exits from repeat playback mode.
play: Puts the unit into repeat playback mode.
143 INDEX PICTURE POSITION Select the frame of the clip to use as the thumbnail image (index picture)
when recording.
0sec
to 10sec: Can be set in the range from 0 seconds (first frame of the
clip) to10 seconds, in units of 1 second.
145 MODE KEY ENABLE DURING
RECORDING
Select whether the STOP button is the only button that stops recording.
ena (all enable): Recording stops when the EJECT button
a)
, PLAY
button, STOP button, SHTL/JOG button, and VAR/JOG button
b)
are
pressed.
stop: Recording stops only when the STOP button is pressed.
150 REC MODE Select the recording mode.
normal
: Normal recording mode
D.EXC (disc exchange cache): Disc Exchange Cache mode
C.REC (clip continuous rec): Clip Continuous Rec mode
151 GUI OPERATION Select whether to disable the display of the Thumbnail Menu and Disc
Menu when this unit is in any mode other than stop mode.
ena(enable
): Do not disable.
stop(via stop): Enable the display of menus in the stop mode.
dis(disable): Disable.
153 FIND MODE Specify the frame to be cued up when the PREV or NEXT button is
pressed.
clip: The first frame of the clip
R.ST (clip & rec start mark)
: The frame where a Rec Start essence
mark is set (if no essence mark is set, the first frame of the clip)
154 SINGLE CLIP PLAY MODE Put the unit into single clip playback mode, or exit from single clip
playback mode.
off
: Exits from single clip playback mode. (Puts the unit into continuous
playback mode.)
on: Puts the unit into single clip playback mode.
Menu items in the 100s, relating to the control panels
Item number Item name Settings
Menu items in the 200s, relating to the remote control interface
Item number Item name Settings
201 PARA RUN Select whether to use synchronized operation for two or more VTRs.
dis (disable)
: No synchronized operationena
ena (enable): Use synchronized operation
Note
To use synchronized operation for two or more VTRs, set item 201 to ena
on all of the VTRs.