Filter
Top Products
On-screen Manual
> Scanning Guide > MP Navigator EX Screens > Scan Settings Dialog Box
Scan Settings Dialog Box
The Scan Settings dialog box opens when you click Specify... in a dialog box of the One-click Mode
screen.
In the Scan Settings dialog box, you can make advanced settings for scanning with one-click or scanning
using the buttons on the machine (Scanner Buttons).
Note
The displayed items vary by document type and how the screen was opened.
Document Type
Select the type of document to be scanned. When Auto Mode is selected, the document type is
automatically detected.
In that case, Color Mode, Document Size, etc. are automatically set as well. When Film(Auto mode) is
selected, the film type (negative or positive) is automatically detected.
Important
Film may not be scanned correctly when Auto Mode or Film(Auto mode) is selected. In that case,
select the type of film and scan again.
To scan correctly, select a document type that matches the document to be scanned.
Place documents correctly according to the type of document to be scanned. Otherwise,
documents may not be scanned correctly.
See "
Placing Documents
" for details on how to place documents.
Color Mode
Select how to scan the document.
Color
This mode renders the image in 256 levels (8 bit) of R(ed), G(reen), and B(lue).
Grayscale
This mode renders the image in 256 levels (8 bit) of black and white.
Important
Grayscale cannot be selected when Film(Auto mode) is selected for Document Type.
Black and White
Page 142 of 334 pagesScan Settings Dialog Box