Filter
Top Products
On-screen Manual
> Scanning Guide >
Troubleshooting
>
MP Navigator EX Problems
> Cannot Scan at the Correct Size
Cannot Scan at the Correct Size
Check 1: Make sure that the documents are placed correctly on the Platen.
Placing Documents
Check 2: Set Document Size to the actual document size and scan again.
If the matching size is not found, scan at a larger size and trim the image.
See the Toolbar ( (Trimming)) in " Correct/Enhance Images Window " for details.
Page top
Page 320 of 334 pagesCannot Scan at the Correct Size