Filter
Top Products
5.
Click
(Crop) and adjust the cropping frame to the desired size.
6.
Click Scan.
Starts scanning.
Check 3: Check if there are frames that are not cropped even when the
whole film image is displayed.
On the Advanced Mode tab of ScanGear, click
(Film Thumbnail) on the Toolbar to display the whole
film image. Cropping frames appear on automatically detected frames. If the frame you want to scan is
not cropped correctly, select the size of the film to be scanned from Scan Area and click
(Film
Cropping Frame). If the frame is still not cropped correctly, adjust the cropping frame. See the procedure
in Check 2 to 6 to adjust the cropping frame.
Page top
Page 312 of 334 pagesFrames Are Not Detected Correctly