Filter
Top Products
On-screen Manual
> Scanning Guide >
Troubleshooting
>
Problems with Scanning > Error Message Appears and the
ScanGear (Scanner Driver) Screen Does Not Appear
Error Message Appears and the ScanGear (Scanner Driver)
Screen Does Not Appear
Check 1: Make sure that the machine is turned on.
Check 2: Connect the USB cable to a different USB port on the computer.
Check 3: If the USB cable is connected to a USB hub, remove it from the
USB hub and connect it to a USB port on the computer.
Check 4: Make sure that the ScanGear (scanner driver) is installed.
If it is not installed, insert the
Setup CD-ROM
into the computer's disc drive, then select Custom Install
and install ScanGear.
Check 5: On the File menu of the application, select Select Source and
select the machine.
Note
The operation may differ depending on the application.
Check 6: Make sure that the application is TWAIN-compliant.
You cannot open ScanGear from applications not supporting TWAIN.
Check 7: Exit ScanGear if it is running on another application.
Page top
Page 294 of 334 pagesError Message Appears and the ScanGear (Scanner Driver) Screen Does Not ...