- A4 size photos
- Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as
paperback pages with the spine cut off
- Documents printed on thin white paper
- Long narrow documents such as panoramic photos
Reflective CD/DVD labels may not be scanned properly.
Film may not be scanned correctly when Auto Mode or Film(Auto mode) is selected. In that
case, select the type of film and scan again.
Note
To reduce moire, set Document Type to Magazine.
Color Mode
Select how to scan the document.
Document Size
Select the size of the document to be scanned.
When you select Custom, a screen in which you can specify the document size appears. Select a
Units, then enter the Width and Height and click OK.
Important
When you select Auto Detect, the image may not be scanned at the correct position and size. In
that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the
document with the corner at the arrow (alignment mark) of the Platen.
Resolution
Select the resolution at which to scan documents. The following scanning resolutions can be
specified:
When Document Type is other than film: 150 dpi / 300 dpi / 600 dpi
When Document Type is film: 300 dpi / 400 dpi / 600 dpi / 1200 dpi / 2400 dpi / 4800 dpi
Resolution
Scale
Select a scale according to the paper to print on or as required.
Select Fit to paper to resize the scanned image automatically to fit to the paper for printing. Since the
image's aspect ratio is maintained, margins may appear at the top and bottom or left and right
edges of the paper depending on the document and paper sizes.
Select Custom to enter a value in Scale. Enter a percentage (25% to 400%) and click OK.
Note
Scanned images are printed onto paper of a size that is specified on your printer.
For details, refer to the manual of your printer.
Brightness
Adjust the image brightness.
Move the slider to the left to darken and right to brighten the image.
Important
This function is available only when Document Type is Magazine or Document.
This function is not available when Document Size is set to be detected automatically.
Use the scanner driver
Select this checkbox to display the ScanGear (scanner driver) screen and make advanced scan
settings.
Page 165 of 334 pagesCopy Dialog Box