Filter
Top Products
- Long narrow documents such as panoramic photos
Reflective CD/DVD labels may not be scanned properly.
Film may not be scanned correctly when Auto Mode or Film(Auto mode) is selected. In that
case, select the type of film and scan again.
Note
To reduce moire, set Document Type to Magazine.
Color Mode
Select how to scan the document.
Document Size
Select the size of the document to be scanned.
When you select Custom, a screen in which you can specify the document size appears. Select a
Units, then enter the Width and Height and click OK.
Important
When you select Auto Detect, the image may not be scanned at the correct position and size. In
that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the
document with the corner at the arrow (alignment mark) of the Platen.
Resolution
Select the resolution at which to scan documents. The following scanning resolutions can be
specified:
When Document Type is other than film: 150 dpi / 300 dpi / 600 dpi
When Document Type is film: 300 dpi / 400 dpi / 600 dpi / 1200 dpi / 2400 dpi / 4800 dpi
Resolution
Brightness
Adjust the image brightness.
Move the slider to the left to darken and right to brighten the image.
Important
This function is available only when Document Type is Magazine or Document.
This function is not available when Document Size is set to be detected automatically.
This function is not available when the Easy Color Matching checkbox is selected.
Use the scanner driver
Select this checkbox to display the ScanGear (scanner driver) screen and make advanced scan
settings.
Color Mode, Document Size, Resolution and other settings in the Print dialog box will be disabled.
Specify these settings in the ScanGear screen.
Important
This function is not available when the Easy Color Matching checkbox is selected.
Specify...
Opens the Scan Settings dialog box in which you can make advanced scan settings.
Scan Settings Dialog Box
Printer Settings
Printer
Page 168 of 334 pagesPrint Dialog Box