Filter
Top Products
On-screen Manual
> Scanning Guide >
Troubleshooting
> Problems with Scanning Film
> Image Becomes Too Dark or
Too Bright When a Cropping Frame Is Moved, Enlarged or Reduced
Image Becomes Too Dark or Too Bright When a Cropping
Frame Is Moved, Enlarged or Reduced
Check: Follow these steps from the Advanced Mode tab of ScanGear
(scanner driver).
1.
Click Preview.
The preview images are refreshed.
When the whole film image is displayed, click
(Whole Film Image) on the Toolbar to display
the thumbnails.
2.
Select the frame you want to correct the colors of.
3.
Click Apply in the Apply the tone value to all frames section.
If the Apply the tone value to all frames section is not displayed, click (Down arrow) of Exposure/
Tone Settings.
4.
Specify a cropping frame and click Scan.
Scanning starts.
Page top
Page 310 of 334 pagesImage Becomes Too Dark or Too Bright When a Cropping Frame Is Moved, E...