Filter
Top Products
xvi
Protect the scanner from static electricity.
Do not use aerosol sprays near the scanner.
Avoid any contact when scanner is working.
Unplug the power cord from the electrical outlet when the
scanner is not used for an extended period of time.
Do not expose the scanner to direct sunlight.
Do not use the scanner immediately after moving it from a cold
place into a warm room.
Install the scanner away from strong magnetic fields and other sources of
electronic noise. Also, protect the scanner from static electricity as this might
cause the scanner to malfunction.
Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt and
dust to enter the scanner, resulting in scanner failure and malfunction.
Avoid touching any scanner mechanism when scanning as this may cause
injuries.
For your safety, unplug the power cord from the electrical outlet when the
scanner is not used for an extended period of time.
Do not install the scanner in a location exposed to direct sunlight or near any
heating apparatus. Doing so increases the inside temperature of the scanner,
and a fire or failure may occur. Install the scanner in a well-ventilated location.
Do not use the device immediately after moving it from a cold place into a warm
room. This may cause condensation, which might lead to scanning errors. Let the
device dry about one or two hours before you use it.