Filter
Top Products
8.4 Cleaning Carrier Sheet
ScanSnap S510 Operator's Guide 235
Daily Care
8
8.4 Cleaning Carrier Sheet
If the Carrier Sheet is used extensively, dirt and dust may stick onto the surface or the interior and
cause scanning errors. Clean it regularly to avoid errors.
Cleaning method
Use dry, soft cloth, or soft cloth slightly moistened with Cleaner F1 (sold separately) or a mild
detergent to lightly clean off the dirt and dust from the surface and the interior of the Carrier Sheet.
ATTENTION
• Never use paint thinner or other organic solvents.
• Do not rub the Carrier Sheet too hard. Otherwise, it may be scratched or be
deformed.
• After cleaning the interior of the Carrier Sheet with Cleaner F1 or mild
detergent, dry the Carrier Sheet completely before closing it.
• As a guideline, it is recommended to replace the Carrier Sheet with new one
every 500 scans.
Refer to "9.4 Purchasing the Carrier Sheet" (page 250) for details on the
purchase of a Carrier Sheet.