Filter
Top Products
3.1 Flow of Operations
ScanSnap S510 Operator's Guide 41
Using the ScanSnap
3
4. Press the [SCAN] button on the ScanSnap.
⇒ The scanning is started.
⇒ The power indicator (lamp) on the ScanSnap blinks blue during the scanning operation.
The following window appears to indicate the scanning status.
HINT
• By default, documents are scanned in "Duplex" mode when you press the
[SCAN] button. In the "ScanSnap Manager - Scan and Save Settings" dialog
box, you can switch the scanning mode of the [SCAN] button to "Simplex"
mode.
• Scanning can also be started by using the ScanSnap Manager icon on
the task bar.
For details about this operation, refer to section "4.1 About the ScanSnap
Icon" (page 64).
ATTENTION
• Do not connect or disconnect other USB devices during the scanning
operation.
• Do not close the paper chute during the scanning operation.
• Do not switch the user to log in during the scanning operation.
S
S