Filter
Top Products
VIS-CAM System
14 Preparing for Installation
2.1.2 Side of Road Installation
Figure 7. Typical side of road installation.
Figure 8. Typical side of road installation plan view with no canopy/overhead
structue.
Generally the flash head must be separated from the camera by a radial distance of at least three
and a half feet (1.2 meters).
If the flash is positioned closer to the camera, reflections from the license plate will cause
overexposure.
If possible, position the flash head in level with the reference plane shown in Figure 9. This plane is
in level with the top surface of the camera enclosure, but slices through the center of the lens.