Filter
Top Products
129
This feature plays back a specific audio file from the designated
destination on the camera or this unit when a generic event
registered with this unit is triggered or when alarm signals are input
to the rear terminal. The Event Audio Settings screen enables you
to configure the above setting as well as other settings related to
the event audio feature.
1 Select [Event Audio Setting] from [Main Menu]
●
The [Event Audio Setting] screen appears.
Event Audio Settings
(VR-N1600U/E)
Item Description
A Event
A list of events that can be used with the
event audio are displayed.
You can use up to a maximum of 100 events
(including both [External Alarm Terminal] and
[Multi Mode]). [Generic Event] that has been
configured on the [Camera Record Setting]
screen, [External Alarm Terminal] on the rear
panel of the VR-N1600U/E unit, as well as
[Multi Mode] are displayed.
Memo :
●
After setting an event for the external
alarm terminal of VR-N1600U/E, do not
delete the
A
[NVR](127.0.0.1)
B
audio input
of the main unit in [Camera Record
Setting]. Doing so clears the settings.
B Conditional
expression
The conditional expression of the [Generic
Event] selected in the [Event] item
A
is
displayed.
C Renew
Updates the current settings of the event
audio feature, and closes the [Event Audio
Setting] screen.
D Cancel
Cancels all settings and closes the [Event
Audio Setting] screen.
Memo :
●
The password at the receiving end
specified on the [Password] screen
cannot be canceled.
A B
C
D
E
F
G
H
Item Description
E Audio files
For specifying the audio file to play back and
number of playbacks when an event is
triggered.
Specify the number of playbacks between
A
1times
B
and
A
10times
B
. You can also select
continuous playback to enable infinite loop
playback. Leave the field blank if you do not
want to designate a playback audio file for a
specific event.
F Start
Button on
the
Different
Pages
[Audio files copy] Button
:Starts up the [Audio file utility] screen.
(A Page 130)
[Setting copy] Button
:Starts up the [Setting copy] screen.
(A Page 131)
[Password setting] Button
:Starts up the [Password setting] screen.
(A Page 131)
[Communication setting] Button
:Starts up the [Communication setting]
screen. (A Page 132)
G Audio
playing for/
IPaddress
Displays a list of cameras or IP addresses
that are used as destinations of audio
playback files.
Select a destination to play back audio files
when an event is triggered from the list.
Select the check box of the camera to play
back audio sound.
You can sort the list accordingly by clicking
[Audio playing for] or [IP address].
H Push To
Talk
Push to Talk is a feature that enables
transmission of audio sound to a camera that
supports bidirectional audio when the
microphone button is pressed down (when
Make signal is input to the [ALARM IN]
terminal of this unit). (
A
Page 20)
To use this feature, select the external alarm
terminal on the rear panel of the
VR-N1600U/E unit.
Leave this blank if you are not using the
[Push To Talk] feature.
The action that is associated with the
[ALARM IN 1 to 8] terminals configured on
the [Camera Record Setting] screen are
disabled when the [Push To Talk] feature is in
use. (Only alarm input of the selected
terminal is disabled. Actions of terminals that
are not selected remain valid.)
[Input/Output Terminal on Rear Panel]
(
A
Page 97)