Filter
Top Products
72
Applications
Unit Setting 2
Main Menu List (continued)
C
D
A
B
Item Preset Values Description
Reference
Page
A HDD meter
Display at startup Select check box
● Do not select check box
Select this check box to display the HDD meter when the
system starts up.
●
For details on HDD meter, refer to [HDD Meter] (
A
Page 133).
A
Page 133
B Clock setting
Display at startup Select check box
● Do not select check box
Select this check box to display the clock when the system
starts up.
A
Page 152
Display at date Select check box
● Do not select check box
Select this check box to display the date on the clock.
A
Page 152
Display at second Select check box
● Do not select check box
Select this check box to display the seconds on the clock.
A
Page 152
C SNMP setting
Enable of SNMP Select check box
● Do not select check box
Select this check box to enable the SNMP function.
A
Page 134
Enable of TRAP Select check box
● Do not select check box
Select this check box to enable the TRAP function.
A
Page 134
SNMP manager’s
address
^
Specify the IP address of the SNMP manager. (IP address)
A
Page 134
Community name ^
Specify the SNMP community name. (1 to 32 characters.
Alphanumeric characters only.)
A
Page 134
Confirmation interval
of alarm
10 seconds
Specify the interval to monitor the alarm.
(10 to 9999 seconds)
A
Page 152
Confirmation interval
of CPU usage
10 seconds
Specify the interval to monitor CPU usage.
(10 to 9999 seconds)
A
Page 152
Confirmation interval
of D-drive
60 seconds
Specify the interval to monitor the writing rate to the D drive.
(30 to 9999 seconds)
A
Page 152
Confirmation interval
of NVR Viewer
10 seconds
Specify the interval to monitor the startup status of NVR viewer.
(10 to 9999 seconds)
A
Page 152
Confirmation interval
of camera
60 seconds
Specify the interval to monitor connection status of the camera.
(60 to 9999 seconds)
A
Page 152
Copy extension MIB onto the flash memory
Copy the MIB extension information into a flash memory device.
●
For details on SNMP settings, refer to [Setting SNMP]
(
A
Page 134).
A
Page 134
D OK/Cancel ^
OK: Exits after entries and the selected content are configured
to the system.
Cancel: Exits without saving all entries and selected settings.
^