Filter
Top Products
80
Applications
Auto Detect Setting
This section enables you to assign an IP address to each camera and configure various auto detect settings.
For procedures on using the Auto Detect feature, refer to [Auto Detect Settings] (
A
Page 113).
Main Menu List (continued)
A
B
C
E
D
F
G
T VR-N900U only
Item Preset Values Description
Reference
Page
A IP Lease
ⅷ Enable
Disable
For configuring the function to assign IP addresses to each
network camera.
Memo :
● In order to assign an IP address of the network camera
using the IP Lease feature, you need to enable the DHCP of
the network camera. For procedures to enable the DHCP of
the network camera, refer to the [INSTRUCRTIONS] of the
network camera.
● If a network uses a multiple number of this product, enable
[IP Lease] only for one unit. Select ADisableB if a DHCP
server is operating on the same network. When the [IP
Lease] is enabled for two or more devices at the same time,
the IP address may change to a static address, and cause
malfunction of the cameras.
A Page 113