Filter
Top Products
- 119 -
SNMPv3
See
"SNMPv3".
IP Security
You can set to enable or disable
IPSec
connection. Also you can check
IPSec
status.
IP/MAC Filtering
You can set filtering options for IP and MAC addresses. If the administrator does not add a
filtering rule for IPv4, IPv6, and MAC addresses, nothing is filtered. If the administrator has
added a filtering rule, filtering will be applied to the entered IPv4, IPv6, and MAC addresses.
IPv4 Filtering
You can enable/disable IPv4 filtering as well as manage filtering rules.
IPv6 Filtering
You can enable/disable IPv6 filtering as well as manage filtering rules.
MAC Filtering
You can enable/disable Mac filtering as well as manage filtering rules.
802.1x
You can enable/disable 802.1x Security.See
"802.1x"
External Authentication Server
Set the servers for authentication.
Kerberos Sever
You can set Kerberos server settings.
Adding a Kerberos server
1
From the
Embedded Web Service
, select the
Security
tab
Network Security
External Authentication Server
Kerberos Server
.
2
Click the
Add
button.
A pop-up window appears.
3
Enter the necessary information.
•
Required Information
–
Realm
: Enter the default realm.
–
Server Address
: Enter the default server address.
–
Port Number
: Enter the default port number. 88 is set as a default value.
–
Make to Default Server
: Check to set the server as the default server.
•
Additional Information