Filter
Top Products
- 258 -
2
Press
Fax
from the home screen.
3
Press the
Direct Input
from the screen.
4
If necessary, adjust the document darkness and resolution to suit your fax needs. See
"
Adjusting the Document Darkness" or "Adjusting the Document Quality"
5
Enter the remote fax speed dial number and holding when entering last number until
shows dial number.
ex) Speed dial number is “102”, enter the “10” and holding “2”.
6
Press
Start
( ) from the screen.
7
When the document is loaded from the document glass, the display shows
Another
Page?
on the screen after the document is scanned into the memory. If you have
additional pages, remove the scanned page and load the next page from the glass and
select
Yes
. Repeat as necessary.
After all of the pages are scanned, select
No
when the display shows
Another Page?
8
it dials the number then sends the fax when the printer establishes contact with the
receiving machine.
NOTE: Press to cancel the fax job at any time while sending the fax.