Filter
Top Products
- 190 -
2-Up or 4-Up copying (N-up)
The machine reduces the size of the original images and prints 2 or 4 pages onto one sheet
of paper. This special copy mode can be applied when you load a document using only the
DADF.
NOTE: You cannot adjust the copy size using the Zoom menu for making a 2 Up or
4 Up copy.
1
Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see "
Loading an Original Document".
2
Press
Copy
Layout
2-Up
or
4-Up
from the home screen.
OR
Press
Multiple-Up Copy
Multiple-Up
2-Up
or
4-Up
from the home screen.
3
Select
2-Up
or
4-Up
.
•
2-Up
: Copies two separate originals onto one page.
•
4-Up
: Copies four separate originals onto one page.
4
Press the left/right arrows to select
Portrait
or
Landscape
according to the original
paper’s orientation.
5
If necessary, customize the copy settings including number of copies, darkness,
original size, and original type. See "
Using Copy and Setting Options".
6
Press to go to the upper menu.
7
Press
Start
( ) on screen to begin copying.
NOTE: You can cancel the copy job at any time. Press ( ) on screen, and
the copying will stop.
Booklet Copying
The machine automatically prints on one or both sides of the paper, which are then folded
to produce a booklet with all the pages in the correct sequence.
The machine will also reduce and correctly adjust the position of each image to fit on the
selected paper.
1 2
2-up copying
(Portrait)
2-up copying
(Landscape)
1 2
3 4
4-up copying
(Portrait)
4-up copying
(Landscape)
2
1