Filter
Top Products
- 272 -
Scanning
You can scan documents using
Image Capture
. Mac OS offers
Image Capture
.
1
Make sure that the machine is connected to your computer and powered on.
2
Load the document(s) face up into the DADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see "
Loading an Original Document".
3
Start
Applications
and click
Image Capture
.
NOTE: If No Image Capture device connected message appears, disconnect
the USB cable and reconnect it. If the problem persists, please refer to the
Image Capture
’s help.
4
Select the option you want.
5
Scan and save your scanned image.
NOTE: If scanning does not operate in
Image Capture
, update Mac OS to the
latest version.
Wireless network setup
Access point via USB cable in Mac
Items to prepare
– Access point
– Network-connected computer
– Software CD that was provided with your machine
– The machine installed with a wireless network interface
–USB cable
1
Check whether the USB cable is connected to the machine.
2
Turn on your computer, access point, and machine.
3
Insert the supplied software CD into your CD/DVD drive.
4
Double-click the CD/DVD icon that appears on your Mac desktop.
• For Mac OS X 10.8, Double-click the CD/DVD icon that appears on your Finder.
5
Double-click the
MAC_Installer
folder
Installer OS X
icon.