Filter
Top Products
- 121 -
–
Port Number
: Enter the default port number from 1 to 65535. 445is set as a
default value.
• Standard port number for SMB over NetBIOS is 139.
• Standard port number SMB over TCPIP direct is 445.
–
Make to Default Server
: Select to make it a default server.
•
Additional Information
–
Backup Server
: Enter the backup server.
–
Port Number
: Enter the backup port number from 1 to 65535. 445is set as a
default value.
4
Click
Apply
.
Deleting a SMB server
1
From the
Embedded Web Service
, select the
Security
tab
Network Security
External Authentication Server
SMB Server
.
2
From the SMB server list, check the server(s) you want to delete.
3
Click the
Delete
button.
4
A confirmation message appears, click
Yes
.
Editing a SMB server
1
From the
Embedded Web Service
, select the
Security
tab
Network Security
External Authentication Server
SMB Server
.
2
From the SMB server list, check the server(s) you want to edit and click
Edit
.
A pop-up window appears.
3
Change the necessary information.
4
Click
Apply
.
Testing a SMB server
1
From the
Embedded Web Service
, select the
Security
tab
Network Security
External Authentication Server
SMB Server
.
2
From the SMB server list, check the server you want to test.
NOTE: The server to be tested should be selected from the list of servers that were
added by using the adding a server feature.
3
Click the
Test
button.
LDAP Server
You can set LDAP server settings.
Adding a LDAP server
1
From the
Embedded Web Service
, select the
Security
tab
Network Security
External Authentication Server
LDAP Server
.