Filter
Top Products
- 227 -
Access point via USB cable in Windows
• Items to prepare
– Access point
– Network-connected computer
– Software CD that was provided with your machine
– The machine installed with a wireless network interface
–USB cable
1
Check whether the USB cable is connected to the machine.
2
Turn on your computer, access point, and machine.
NOTE: If the “Found New Hardware Wizard” appears during the installation
procedure, click Cancel to close the window.
3
Insert the supplied software CD into your CD/DVD drive.
The software CD should automatically run and an installation window will appear.
If the installation window does not appear, click
Start
All programs
Accessories
Run
.
X:\
Setup.exe
replacing “X” with the letter, which represents your CD/DVD drive and
click
OK
.
• For Windows 8,
If the installation window does not appear, from
Charms
, select
Search
Apps
and
search for
Run
. Type in X:\Setup.exe, replacing “X” with the letter that represents your
CD/DVD drive and click
OK
.
If “
Tap to choose what happens with this disc.
” pop-up window appears, click the
window and select
Run Setup.exe
.