Filter
Top Products
- 72 -
Setting the Quick Dial (Administrator only)
Set the speed dial numbers.
1
Press
My Settings
Machine Setup
Speed Dial Setting
from the home screen.
Or
Press and hold the
Speed Dial1( ) or Speed Dial2 ( )
button on the control
panel for less than 2 seconds.
2
Select number you want.
3
Choose the appropriate option.
•Add () Quick Dial number1 : Stroed at Quick Dial 1.
• Add ( ) Quick Dial number2 : Stored at Quick Dial 2.
• Delete ( ) Quick Dial number : Delete the Quick Dial number.
4
Press and home icon ( ) to return to Home Screen.
Setting the Media Overwrite (Administrator only)
You can select the method for overwriting the secure non-volatile memory (hard disk).
1
Press
My Settings
Machine Setup
Initial Setup
Media Overwrite
from the
home screen.
2
Selects option you want.
•
DoD 5220.28M
: Select to overwrite the memory 3 times. When overwriting three
times, patterns 0x35, 0xCA, 0x97 are used to overwrite the disk’s content. This
method of overwriting the disk is specified by US DoD.
•
Australian ACSI 33
: Select to overwrite the memory 5 times. When overwriting 5
times, character “C” and its complement alternatively are used to overwrite the
disk. After the 2nd time, there is a mandatory validation. For the 5th time, random
data is used.
•
German VSITR
: Select to overwrite the memory 7 times. When overwriting for the
6 times, alternate 0x00 and 0xff are used to overwrite the disk, and, in the 7th
time, the disk is written with 0xAA.
•
Custom
: Select to determine the number of times the memory will be
overwritten. The hard disk will be overwritten as many times as the number you
select.
3
Press
Start
( ) on the screen.
If you select Yes, all jobs will be delete and system reboot immediately.
Changing Admin Password (Administrator only)
You can change admin passwod.
1
Press
My Settings
Machine Setup
Initial Setup
Change Admin Password
from the home screen.
2
Enter the new password and confirm password.
Press
Check
( ) then home icon ( ) to return to Home Screen.