Filter
Top Products
- 254 -
Automatic Redialing
When the number you have dialed is busy or there is no answer when you send a fax, the
machine automatically redials the number. The redial time depends on the country's factory
default setting.
To change the time interval between redials and the number of redial attempts, see
"
Available Fax Defaults Options".
Redialing fax number
When you want to redial the last fax number you have sent, you can use this feature.
1
Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see "
Loading an Original Document".
2
Press
Fax
from the home screen.
OR
Press
All Applicatons
()
Fax
from the home screen.
3
Press
Redial
on control pannel or
Caller ID
from the screen. If you select the
Caller ID
,
ten recently sent fax numbers with ten received Caller IDs are shown.
4
Select the fax number you want.
5
If necessary, adjust the document darkness and resolution to suit your fax needs. See
"
Adjusting the Document Darkness" or "Adjusting the Document Quality"
6
Press
Start
( ) from the screen.
7
it dials the number then sends the fax when the printer establishes contact with the
receiving machine.