Filter
Top Products
- 192 -
5
Press
Start
( ) from the screen.
6
Turn the original over and place it on the document glass, where arrows indicate as
shown then, close the scanner lid.
7
Press
Start
( ) from the screen.
NOTE: You can cancel the copy job at any time. Press ( ) on screen, and
the copying will stop.
Clone Copying
This special copy mode can be applied when you load a document using only the
document glass. If a document is detected on the DADF, the
Clone
copying feature does
not work.
NOTE: You cannot adjust the copy size using the Zoom menu while making a clone
copy.
To make the
Clone
copying:
1
Place a single document face down on the document glass.
For details about loading a document, see "
Loading an Original Document".
2
Press
Copy
from the home screen.
3
Press the left/right arrows to select
Layout
Clone
.
4
If necessary, customize the copy settings including number of copies, darkness,
original type, and original size by pressing
Options
. See "Using Copy and Setting
Options"..
5
Press
Start
( ) on screen to begin copying.
NOTE: You can cancel the copy job at any time. Press ( ) on screen, and
the copying will stop.