Filter
Top Products
13
Quick Start Guide
Recording a picture on a tape (p. 37)
Monitoring the playback picture on the LCD
screen (p. 53)
When you purchase your camcorder, the date and time are not set for the clock. If you want to
record the date and time for a picture, set the clock setting before recording (p. 31).
2Set the POWER switch
to CAMERA while
pressing the small
green button.
4Press START/STOP. Your
camcorder starts recording. To
stop recording, press START/
STOP again.
1Remove the lens cap.
3Press OPEN
to open the
LCD panel.
The picture
appears on
the screen.
Viewfinder
When the LCD panel is closed,
use the viewfinder with your
eye against the eyecup.
Adjust the viewfinder lens to
your eyesight (p. 44).
1Set the POWER
switch to VCR
while pressing the
small green button.
3Press on the touch panel to
start playback.
Note
When using the touch panel, press
operation buttons lightly with your
finger supporting the LCD panel from
the back side of it. Do not press the
LCD screen with sharp-pointed objects.
2Press on the touch panel to
rewind the tape.
VCR
MEMORY
CAMERA
OFF(CHG)
POWER
POWER
VCR
MEMORY
CAMERA
OFF(CHG)
Do not pick up your camcorder
by holding parts as illustrated.
Viewfinder FlashLCD panel Battery pack