Filter
Top Products
233
Customising Your Camcorder / Personnalisation du caméscope
Icon/item
OTHERS
DATA CODE
(On the Remote
Commander)
AREA SET
SUMMERTIME
BEEP
COMMANDER
DISPLAY
Meaning
To display date, time and various settings during
playback when you press DATA CODE on the
Remote Commander (p. 54)
To display date and time during playback when
you press DATA CODE on the Remote
Commander
Temporarily change the area where you are using
your camcorder
Not during summer time
During summer time
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
To output the beep instead of the melody
To cancel melody, the beep sound and shutter
sound
To activate the Remote Commander supplied
with your camcorder
To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR’s remote control
To show the display on the LCD screen and in the
viewfinder
To show the display on the TV screen, LCD screen
and in the viewfinder
Mode
z DATE/CAM
DATE
——
z OFF
ON
z MELODY
NORMAL
OFF
z ON
OFF
z LCD
V-OUT/LCD
Changing the menu settings
Note
If you press DISPLAY/BATT INFO with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your camcorder is connected
to the output jacks on the TV or VCR.
POWER
switch
(continued on the following page)