Filter
Top Products
225
Customising Your Camcorder / Personnalisation du caméscope
Changing the menu settings
Menu items are displayed as the following
icons:
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEM SET 1
MEM SET 2
CM SET
TAPE SET
SETUP MENU
OTHERS
English
Selecting the mode setting of each item z is the default setting.
Menu items differ depending on the position of the POWER switch.
The screen shows only the items you can operate at the moment.
Icon/item
MANUAL SET
PROGRAM AE
P EFFECT
RED EYE R
FLASH LVL
WHT BAL
SHARPNESS
AUTO SHTR
Mode
——
——
z OFF
ON
HIGH
z NORMAL
LOW
——
——
z ON
OFF
Meaning
To suit your specific shooting requirement (p. 77)
To add special effects like those in movies or on the TV
to images (p. 73, 91)
Red-eye reduction does not function.
Preliminary flash before recording prevents red-eye.
To make the flash level higher than normal
To use the normal setting
To make the flash level lower than normal
To adjust the white balance (p. 66)
To adjust the sharpness of the image outline with r/R.
When the sharpness is manually adjusted, the
indicator appears.
To automatically activate the electronic shutter* when
shooting in bright conditions
To not automatically activate the electronic shutter*
even when shooting in bright conditions
POWER
switch
* About the electronic shutter
The electronic shutter is the function used to adjust the shutter speed electrically.
Note on FLASH LVL and RED EYE R
You cannot adjust FLASH LVL and RED EYE R if the external flash (optional) is not compatible.
To soften To sharpen
Les paramètres du menu sont affichés sous la
forme des icônes suivantes :
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEM SET 1
MEM SET 2
CM SET
TAPE SET
SETUP MENU
OTHERS
Modification des réglages du
menu
(continued on the following page)