Filter
Top Products
UBCD396XT
105
30. Program System
The Program System menu lets you create systems and edit existing systems. All
existing systems are listed in the order they were created: select the system you
want to edit, or select New System to create a new one.
When you create a new system, the scanner prompts you to select a system type;
the system type you select controls what options are available for the system setup.
You can't change a system type once the system is created: if you need to change
the system type, delete the system and create it all over again as a new system.
The System Type options are:
P25 : Use for any P25 system. When you select this system type, the scanner
prompts you to choose Standard Trunk or One-Freq .
MOT : Use for any Motorola system.
EDCS : Use for any EDACs system. When you select this system type, the
scanner prompts you to choose WIDE/NARROW or SCAT .
LT : Use for any LTR system.
Conventional : Use for any non-trunked system.
REMEMBER: Once you select a system type, you can't change it!
Edit Name
Enter a name or edit the existing one. Names can be 16 characters long, and they
can contain upper and lower case letters, punctuation, and spaces. Turn the
SELECTVOLUME-SQUELCH knob on the handheld scanners or the SCROLL
/ FUNCTION knob on mobile scanners to choose the character you want, then
press 6 (right cursor) to move the cursor to the next character.
Edit Sys Option
This menu lets you set the options for each system.
Edit Site
(trunked systems only) This menu lets you create sites and edit existing sites. All
existing sites are listed in the order they were created: select the site you want to
edit, or select New Site to create a new one.