Filter
Top Products
UBCD396XT
118
Volume Offset
The scanner can automatically adjust the volume when it tunes to this channel or
frequency. Enter one of the following options:
Softer No Change Louder
-3, -2, -1 0 (default) +1, +2, +3
Copy Channel
Copy this channel and all its settings into the buffer. When a channel is stored in
the buffer, the scanner adds Paste Channel to the bottom of the Program Channel
menu whenever you are editing a compatible system (that is, a system that is the
same type as the one you copied the channel from).
Delete Channel
Delete this frequency or channel and all associated settings.
New Channel
Create a new channel.
Analog channel options
The following options are available only when the Audio Type is set to Analog .
Set CTCSS/DCS
(Conventional systems only) Choose one of the following CTCSS/DCS options for
this channel:
Off
The scanner ignores all CTCSS and DCS tones and opens
squelch on any signal.
Search
The scanner displays any received CTCSS and DCS tones, but it
opens squelch on any signal.
CTCSS
The scanner prompts you to enter a CTCSS code; it will only
open squelch if the received signal contains a CTCSS tone that
matches the one you enter here.
DCS
The scanner prompts you to enter a DCS code; it will only open