Filter
Top Products
UBCD396XT
5
3. Connecting a GPS receiver
A third party GPS receiver is required to utilise the scanner’s location based features.
Compatible GPS receivers
You can connect your scanner to any GPS receiver that meets the following
criteria:
Outputs NMEA-0183 v3.01-compliant location data
Outputs both the Global Positioning System Fix ( GGA ) and Recommended
Minimum Specific GNSS ( RMC ) data sentences
Provides a serial data (RS-232) connection
Configuring your scanner
1. Go to the Settings menu and select Set Serial Port.
2. Select 4800 bps for the baud rate.
Connecting the receiver
1. Connect your GPS receiver to a null modem adapter or cable.
2. Connect the data transfer cable that was supplied with your scanner to the
null modem.