Filter
Top Products
UBCD396XT
157
46. Search for...
Use this menu to start a search, to change the options for the three different types
of searches, and program the 3 search keys.
Service Search
Start a search of one of the 8 preset service bands. Choose from Air, CB Radio,
UHF CB Radio, Racing, FM Broadcast, Police, Marine, Railroad .
Edit Service
This menu lets you change the default settings for the 12 preset service bands.
Select the service you want to edit from the list, then set the following options:
Set Delay Time
Set the number of seconds the scanner should wait after a transmission stops
before moving on to the next channel. Select 0, 1, 2 (default), 5, 10, or 30 seconds.
To have scanner leave the channel after a designated number of seconds whether
the transmission stops or not, select one of the negative values. Choose -10
seconds to have the scanner leave the channel after 10 seconds even if the
transmission is still going on; choose -5 seconds or -2 seconds to have the scanner
leave after 5 seconds or 2 seconds, respectively.
Set Attenuator
Turn on attenuation to reduce the signal strength by 20 dB. All frequencies in the
search range are attenuated during search.
Set Audio AGC
Turn on Automatic Gain Control (AGC) for this system. When you activate this
feature, the scanner automatically adjusts the volume for each channel based on the
signal strength. You can turn on the gain control for Analog and Digital signals
separately.
To change the settings for the audio AGC, see Adjust Audio AGC
P25 Waiting Time