Filter
Top Products
UBCD396XT
3
Install the batteries
Your scanner can use either regular alkaline batteries or rechargeable nickel-metal
hydryde (NiMH) batteries.
The batteries that came with your scanner are rechargeable NiMH.
To install the batteries:
1. Remove the cover from the battery compartment.
2. Make sure that the charge switch is set to the correct battery type:
Use the Alkaline setting for any regular or nonrechargeable battery
Use the NiMH setting for any rechargeable battery
3. Make sure the polarity (plus and minus) of each battery matches the diagram
inside the compartment.
4. Replace the battery compartment cover.
Connect the antenna
To connect the antenna, just screw it onto the SMA connector at
the top of the scanner.
If you want to use an external antenna, attach the included
SMA/BNC adapter to the scanner's SMA connector.
Then, connect your external antenna to the BNC connector.