Filter
Top Products
UBCD396XT
112
32. Edit Group
When you create a new channel group, the scanner automatically assigns a default
name of Group XX, where XX is a 2-digit sequential number (1 through 20).
Options available for all groups:
You have the following options for channel groups:
Edit Name
Enter a name or edit the existing one. Names can be 16 characters long, and they
can contain upper and lower case letters, punctuation, and spaces. Turn the
SELECTVOLUME-SQUELCH knob on the handheld scanners or the SCROLL
/ FUNCTION knob on mobile scanners to choose the character you want, then
press 6 (right cursor) to move the cursor to the next character.
Set Quick Key
Assign this group to a Quick Key so you can easily enable or disable it during
scanning. Enter a number from 0 to 9; tap NO (the decimal point) if you don't want
to assign this group to a Quick Key. (For more information, see Quick Keys.)
Edit Channel
Use this menu to program channel information for this group (see Edit Channel).
Set LocationInfo
Use this menu to program location information for this group (see Set
LocationInfo).
Set Lockout
Decide whether you want to lock out the channel group so the scanner will ignore
it during Scan and Search modes. If you lock out the channel group, all channels in
the group are also ignored during Scan and Search. Choose one of the following
options:
Unlocked: The channel group is not locked out.
Temporary L/O: The channel group is locked out until you turn the scanner
off and back on.