Filter
Top Products
UBCD396XT
45
Once you create the system and at least 1 site, you can scan the system in ID
Search mode. In this mode, the scanner stops on all system traffic for talk groups
you have not locked out. If you want to use ID Scan mode, you'll need to program
channels into the system. In ID Scan, the scanner only stops on talk groups you
have programmed into a channel.
Create a channel group
Each Motorola system can contain up to 20 channel groups.
1. On the Program System menu, select the system you just created.
2. Go to the Edit Group menu and select New Group.
3. If you need to change any of the channel group properties, you can do that
now. Unless a property is Required, you can operate the system without
changing the default settings.
Channel group properties
(All of these options can be found by selecting the group name under the Edit
Group menu. If necessary, the sub-menu and the exact option name are listed
beside each property.)
Required
None
Recommended
Name (Edit Name)
Quick key (Set Quick Key)
Optional
Location information (Set LocationInfo)
Lockout (Set Lockout)
Available
operations
Delete Group
Create a channel
Each trunked system can contain up to 500 channels.
1. On the Edit Group menu, select the channel group you just created.
2. Go to the Edit Channel menu and select New Channel.
3. Input the Talk Group ID (TGID) for this channel.
4. If you need to change any of the channel properties, you can do that now.
Unless a property is Required, you can operate the system without changing
the default settings.