Filter
Top Products
UBCD396XT
124
36. Set Frequencies
This menu lets you create frequencies and edit existing ones. All existing
frequencies are listed in the order they were created: select the frequency you want
to edit, or select New Frequency to create a new one. When creating frequencies,
keep the following rules in mind:
You can't duplicate frequencies within a site.
You can store at least 500 frequencies per site.
You can store up to 1000 frequencies per site, depending on the number of
TGID in the entire system.
Edit Frequency
Enter a valid frequency for this band. If the frequency is invalid or if it already
exists, the scanner sounds an error tone and prompts you to re-enter the frequency.
Set Lockout
Determines whether the frequency will be scanned. If you lock out the frequency
and the frequency is used as the control channel, the system will not be scanned.
Temporary Lockout - The lockout will be cleared when you cycle power.
Lockout - The lockout must be manually cleared.
Unlocked - The scanner will use the frequency when monitoring the system.
Delete Frequency
Delete this frequency or channel and all associated settings.
New Frequency
Create a new frequency.
LTR and EDACS system options
When you're editing site frequencies within an LTR or EDACS wide or narrow
system, you have the following additional options: