Filter
Top Products
UBCD396XT
151
44. Program Location
The Program Location menu lets you create and edit points of interest ( POI ),
intersections( Dangerous Xing ), and roads ( Dangerous Road ). The available
settings vary for each location type.
POI
Edit Name
Enter a name or edit the existing one. Names can be 16 characters long, and they
can contain upper and lower case letters, punctuation, and spaces. Turn the
SELECT VOLUME-SQUELCH knob on the handheld scanners or the
SCROLL / FUNCTION knob on mobile scanners to choose the character you
want, then press 6 (right cursor) to move the cursor to the next character.
Set Type
When you create a location, the location is created as the type you are currently
viewing (POI, Dangerous Xing, or Dangerous Road). If you want to change the
location type, you can select the new location type here.
When you change the location type, the scanner goes back to the Program
Location menu. Select the new location type to edit this location; the scanner resets
the available options based on the new location type.
Set Alert
This menu lets you configure whether the scanner triggers an alert tone and light
when you approach this location.
Set Alert Light
This setting is exactly the same as its counterpart on the system, site, and channel
menus.
Set Alert Tone
Choose one of the available alert tones for this POI:
– Alert 1 :
1047 Hz for 125 ms / Silence for 50 ms / 1047 Hz for 125 ms / Silence for