Filter
Top Products
UBCD396XT
108
don't want to assign this system or site to a Quick Key. (For more information, see
Quick Keys.)
Set Startup Key
Assign this system or site to a Startup Key so you can lock or unlock it during
power up. Enter a number from 0 to 9; tap NO (the decimal point) if you don't
want to assign this system or site to a Startup Key. (For more information, see
Startup Keys.)
Set Lockout
Decide whether you want to lock out the system so the scanner will ignore it
during Scan and Search modes. If you lock out a system, all channels within that
system are locked out. Choose one of the following options:
Unlocked: The system is not locked out.
Temporary L/O: The system is locked out until you turn the scanner off and
back on.
Lockout: The system is permanently locked out.
Set Hold Time
Set the minimum number of seconds the scanner should spend checking this
system or site even if there is no traffic on any channel. (The scanner always
checks each channel in a system or site once even if the hold time is set to 0
seconds.) Select the number of seconds from 0 through 255 (0 is the default).
P25 Waiting Time
On channels that contain a mix of analog and digital signals (i.e., where the Audio
Mode is set to All), it is possible to have false decode problems caused by digital
noise at the beginning of transmissions. To prevent this, a user-configurable P25
wait time (from 0 to 1000 ms) has been added.
During the wait time, the scanner evaluates the received signal; if it detects P25
data, the scanner opens squelch immediately. If it does not detect any P25 data, the
scanner opens squelch as soon as the wait time expires.
Note: Any analog transmissions on this channel will lose the first part of the
transmission, up to the wait time you set here.