Filter
Top Products
UBCD396XT
76
20. Number Tags
Number Tags let you quickly navigate to a specific system or channel.
You can assign Number Tags at the system level (System Number Tag, or
SNT), at the channel level (Channel Number Tag , or CHNT), or at both
levels.
You can assign an SNT to the temporary system Close Call Hits that is
created during Close Call searches. This system and its SNT operate like any
other system.
You can assign Number Tags to service searches and custom search ranges.
These search Number Tags operate like regular SNTs.
Programming Number Tags
Assigning an SNT
SNTs can range from 0 to 999.
Systems can have the same SNT, but you will get a warning when you
create multiples. (This includes SNTs assigned to the Close Call Hits system
or any search ranges.)
To a system:
1. Open the Program System menu.
2. Select the system you want to assign the number tag to.
3. Select Edit Sys Option, then select Set Number Tag.
4. Enter the number tag you want to use for this system.
To the Close Call Hits system :
1. Open the Close Call menu.
2. Select Hits with Scan, then select Set Number Tag.
3. Enter the number tag you want to use for the Close Call Hits system.
To a service search range:
1. Open the Search for... menu.
2. Select Edit Service, then select the service search range you want to assign
the number tag to.