Filter
Top Products
UBCD396XT
16
as a voice channel, but the scanner is
receiving data on it.
DAT: The current channel is configured
as a control channel, and the scanner is
receiving data on it.
ENC: The received signal is encrypted
P25 digitized voice, and the scanner has
muted the audio.
Cxx.x: The scanner has detected a
CTCSS code; the received code is
displayed in place of the Xs.
DCSxxx: The scanner has detected a
DCS code; the received code is
displayed in place of the Xs.
NAC: xxx: The scanner has detected a
P25 network address code (NAC); the
received code is displayed in place of
the Xs.
Close call icon
Normal (open) icon:
Steady: Close call priority mode is on.
Blinking: Close Call Only mode is on,
or the scanner has detected a close call
signal.
Reversed (filled) icon:
Steady: Close call DND mode is on.
Blinking: Close call DND mode is on,
and the scanner has detected a close call
signal.
Function icon Steady: You tapped the FUNCTION key; the
scanner will remember the FUNCTION + key
combination for the next 3 seconds.
Blinking: You pressed & held the
FUNCTION key: the scanner will remember
the FUNCTION + key combination until you
tap FUNCTION again.
Group number line (GRP)
In Scan mode: The group Quick Key numbers
(GQK) of any unlocked groups in the current
system or site are displayed on this line. The
GQK number of the group that is currently