Filter
Top Products
UBCD396XT
36
12. LTR Trunked Systems
Please note that these pages are meant as general instructions.
Programming an LTR System
To program an LTR system, you'll need to program the required elements in
following order:
Create a system
1. Go to the Program System menu and choose New System.
2. The scanner will prompt you for the System Type. Select LT.
3. When the scanner prompts you confirm, tap YES.
4. The scanner creates the system with a default name. Select Edit Name if you
want to change it.
5. If you need to change any of the system properties, you can do that now.
Unless a property is Required, you can operate the system without changing
the default settings.
System properties
All of these options can be found under your scanner's Program System menu. If
necessary, the submenu and option name on each scanner are listed beside the
property.
Property Option name
Required
None
Recommended
Name Edit Name
Number tag Set Number Tag
Optional
Automatic Gain Control
(AGC)
Set Audio AGC
Delay time Set Delay Time
ID scan/search ID Scan/Search
Priority ID scan Priority ID Scan